This form complies with OSHA's Hazard Communication Standard, 29 CFR 1910.1200.
IDENTITY (As Used on Label and List): Adams Flea & Tick Dust II

---

SECTION I - PRODUCT IDENTIFICATION
Adams Flea & Tick Dust II

---

MANUFACTURER NAME AND ADDRESS:		TELEPHONE #S:	DATES:
Distributed by:	24 Hour Emergency	(602)234-2269	Date Entered: 04/06/1999
Veterinary Products Laboratories	Business Hours	(602)285-1660	Last Revision: 04/06/1999
301 West Osborn Road			MSDS Printed: 09/14/2000
Phoenix, AZ. 85013

SYNONYMS:

CHEMICAL FAMILY:
HAZARD LABEL:
MOLECULAR FORMULA: , MOLECULAR WEIGHT: NE or NA

---

SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Adams Flea & Tick Dust II

---

HAZARDOUS COMPONENTS (SPECIFIC CHEMICAL IDENTITY/COMMON NAME)	CAS #	PERCENTAGE
Talcum {Talc; hydrous magnesium silicate}	14807-96-6	10.0 - 75.0
Piperonyl butoxide {(a glycol ether)}	51-03-6	1.0
Carbaryl {1-Naphthalenol-methylcarbamate}	63-25-2	12.5
Silica, Hydrated amorphous	63231-67-4	10.0
Pyrethrins {Cinerin I or II; Pyrethrum}	8003-34-7	0.1

CAS #	OSHA PEL	ACGIH TLV	OTHER LIMITS
14807-96-6	2 mg/m3 OSHA TWA	2 mg/m3 ACGIH TWA	Respirable dust
51-03-6
63-25-2	5 mg/m3 OSHA TWA	5 mg/m3 ACGIH TWA
63231-67-4	6 mg/m3 OSHA TWA	10 mg/m3 ACGIH TWA	Total dust, < 1% quartz
8003-34-7	5 mg/m3 OSHA TWA	5 mg/m3 ACGIH TWA

---

SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Adams Flea & Tick Dust II

---

BOILING POINT: NE or NA SPECIFIC GRAVITY (WATER = 1): NE or NA MELTING POINT: NE or NA VAPOR PRESSURE (MM HG): . . . NE or NA VAPOR DENSITY (AIR=1):. . . . NE or NA PHYSICAL STATES: [ ] Gas EVAPORATION RATE: . . . . . . NE or NA [ ] Liquid (Butyl Acetate=1) [ X ] Solid SOLUBILITY IN WATER:. . . . . NE or NA Insoluble in water PERCENT VOLATILE: . . . . . . APPEARANCE AND ODOR:
Odorless off-white to tan powder.

---

SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Adams Flea & Tick Dust II

---

FLASH PT: NE or NA METHOD USED:
EXPLOSIVE LIMITS: LEL: UEL:
AUTOIGNITION PT: NE or NA EXTINGUISHING MEDIA:
Use water, carbon dioxide or foam.
SPECIAL FIRE FIGHTING PROCEDURES:
Self contained breathing apparatus and full protective equipment are recommended for firefighters. Toxic or corrosive gases can be expected in fires of this material.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
As with many dusts, explosions can result when excessive dust concentrations are present. Avoid generating dust.

---

SECTION V - REACTIVITY DATA
Adams Flea & Tick Dust II

---

STABILITY: Unstable [ ] Stable [ X ]
CONDITIONS TO AVOID - INSTABILITY:

INCOMPATIBILITY - MATERIALS TO AVOID:

HAZARDOUS DECOMPOSITION OR BYPRODUCTS:

HAZARDOUS POLYMERIZATION: May occur [ ] Will not occur [ X ]
CONDITIONS TO AVOID - HAZARDOUS POLYMERIZATION:

---

SECTION VI - HEALTH HAZARD DATA
Adams Flea & Tick Dust II

---

ROUTE(S) OF ENTRY: Inhalation? Yes , Skin? Yes , Eyes? Yes , Ingestion? Yes , Other:
HEALTH HAZARDS (ACUTE AND CHRONIC):
REPRODUCTIVE EFFECTS: This mixture contains material which produced adverse reproductive or developmental effects in animals at high levels.
CARCINOGENICITY: NTP? No , IARC Monographs? No , OSHA Regulated? No
CARCINOGENICITY/OTHER INFORMATION:
This mixture may contain small amounts of crystalline silica which is listed as a carcinogen by IARC. No other components are listed as carcinogens by IARC, NTP or OSHA.
RECOMMENDED EXPOSURE LIMITS: oral LD50 > 1500 mg/kg in rats
LD 50/LC 50: inhalation LC50 > 5.2 mg/l in rats
SIGNS AND SYMPTOMS OF EXPOSURE:
SKIN CONTACT: Irritations not expected after direct contact, based on studies in animals. However, skin contact should be avoided.
EYE CONTACT: Irritation is not expected after direct contact, based on studies in animals. However, eye contact should be avoided.
INHALATION: Dust is not expected to be toxic, based on studies in animals. This material contains small amounts of crystalline silica. Avoid repeated dust inhalation.
INGESTION: Toxicity following ingestion is not expected, based on animal studies. However ingestion should be avoided.

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:
This mixture contains material which may produce toxicity in developing offspring, based on animal studies. Over exposure during pregnancy may have an adverse effect on developing offspring.
EMERGENCY AND FIRST AID PROCEDURES:
SKIN CONTACT: Remove contaminated clothing and wash exposed area with soap and water. Obtain medical assistance if irritation or unusual symptoms occur.
EYE CONTACT: Wash eyes with water for at least 15 minutes then obtain immediate medical assistance.
INHALATION: Move exposed person to fresh air. Refer to a physician if subject experiences difficulty breathing. If breathing has stopped, perform artificial respiration and seek immediate medical assistance.
INGESTION: Call a physician or Poison Control Center. Drink 1 or 2 glasses of water and induce vomiting by touching back of throat with finger. If person is unconscious, do not give anything by mouth and do not induce vomiting.
NOTE TO PHYSICIAN OR USER:
This material contains pyrethrin and carbamate insecticides. In cases of over exposure, consult a poison control center for additional information concerning pyrethrin and carbamate poisoning and treatment.
ANTIDOTES: NONE

---

SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Adams Flea & Tick Dust II

---

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
SPILLS: For large spills, isolate the spill area, restrict access and post the area for hazards present (combustable dust, skin irritant eye irritant) and necessary precautions. Wear appropriate protective equipment to avoid skin contact and eye contact. Avoid sparks and open flames. Scoop or shovel into a suitable, properly labeled container for recovery or disposal.
WASTE DISPOSAL METHOD:
Do not reuse empty containers. Observe all federal, state and local regulations when disposing of this material.
HAZARD LABEL INFORMATION:

Store in cool, dry area
CO, HCN, acetonitrile	Do not reuse this container.

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING:
HANDLING: Use with adequate ventilation.
STORAGE: Store in a cool, dry place away from heat, open flames and other containers of food or feed. Do not transfer to other containers.
OTHER PRECAUTIONS:

---

SECTION VIII- CONTROL MEASURES
Adams Flea & Tick Dust II

---

PROTECTIVE EQUIPMENT SUMMARY - HAZARD LABEL INFORMATION

Rubber gloves

Clothes to prevent skin contact

RESPIRATORY EQUIPMENT (SPECIFY TYPE):
An appropriate respirator should be used if respiratory discomfort occurs. For US operations, OSHA 29 CFR 1910.134 must be followed if respirator use is employed in the workplace. For non US operations, review pertinent local regulations.
VENTILATION:
LOCAL EXHAUST: SPECIAL:
MECHANICAL (GENERAL): OTHER:
EYE PROTECTION:
Glasses or goggles are recommended if eye contact is possible.

PROTECTIVE GLOVES:
Avoid skin contact or wear impervious gloves when handling this material.
OTHER PROTECTIVE CLOTHING:
Wear clothing with long sleeves to avoid skin contact.
WORK/HYGIENIC/MAINTENANCE PRACTICES:
INDUSTRIAL HYGIENE METHOD: Contact the site Occupational or Industrial Hygienist for hygiene monitoring of occupational exposure. Further advice on suitable monitoring methods can be obtained from the appropriate regional Corporate Environmental and Occupational Health & Safety Department.
HYGIENE PRACTICES: If gloves are used, wash gloves before removing. Wash hands and arms thoroughly after handling this material. Clean up spills immediately.

---

SECTION IX - ADDITIONAL COMMENTS
Adams Flea & Tick Dust II

---

ECOLOGICAL INFORMATION: This mixture contains active ingredients that are harmful to aquatic life at low concentrations.
IMPORTANT: The information and data herein are believed to be accurate and have been compiled from sources believed to be reliable. It is offered for your consideration, investigation and verification.

---